|
|
SparkFun Accessories The SparkFun weather:bit is a fully loaded "carrier" board for the micro:bit that when combined with the micro:bit provides you with a fully functional weather station. With the weather:bit you will have access to barometric pressure relative humi
- DEV-15837
- SparkFun
-
1:
£13.78
-
2In Stock
|
Mouser Part No
474-DEV-15837
|
SparkFun
|
SparkFun Accessories The SparkFun weather:bit is a fully loaded "carrier" board for the micro:bit that when combined with the micro:bit provides you with a fully functional weather station. With the weather:bit you will have access to barometric pressure relative humi
|
|
2In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
Carrier Boards
|
Weather:bit
|
|
|
|
SparkFun Accessories The SparkFun Qwiic Connect System is constantly growing in popularity with makers. So to make it even easier to get started we've assembled this Qwiic Cable Kit for everyone. If you aren't sure which Qwiic cable to use this handy box includes all o
- KIT-15081
- SparkFun
-
1:
£10.49
-
149In Stock
|
Mouser Part No
474-KIT-15081
|
SparkFun
|
SparkFun Accessories The SparkFun Qwiic Connect System is constantly growing in popularity with makers. So to make it even easier to get started we've assembled this Qwiic Cable Kit for everyone. If you aren't sure which Qwiic cable to use this handy box includes all o
|
|
149In Stock
|
|
Min.: 1
Mult.: 1
|
No
|
|
Cables
|
Qwiic Cable Kit
|
|
|
|
SparkFun Accessories Translating physical forces into digital data usually requires managing multiple components but the SparkFun Qwiic Scale simplifies the entire process. With the on-board NAU7802 this Qwiic breakout board acts as an all-in-one amplifier and Analog-t
- SEN-15242
- SparkFun
-
1:
£13.52
-
75In Stock
|
Mouser Part No
474-SEN-15242
|
SparkFun
|
SparkFun Accessories Translating physical forces into digital data usually requires managing multiple components but the SparkFun Qwiic Scale simplifies the entire process. With the on-board NAU7802 this Qwiic breakout board acts as an all-in-one amplifier and Analog-t
|
|
75In Stock
|
|
Min.: 1
Mult.: 1
|
No
|
|
Breakout Boards
|
Qwiic Scale
|
|
|
|
SparkFun Accessories Qwiic JST Connector- SMD 4-pin
- PRT-14417
- SparkFun
-
1:
£0.439
-
5,445In Stock
|
Mouser Part No
474-PRT-14417
|
SparkFun
|
SparkFun Accessories Qwiic JST Connector- SMD 4-pin
|
|
5,445In Stock
|
|
Min.: 1
Mult.: 1
:
1,000
|
|
|
Connectors
|
Tiny 4-Pin SMD Connector
|
|
|
|
SparkFun Accessories Buttons are an easy and tactile way to interface with your project but why would you want to deal with debouncing polling and wiring up pull-up resistors? The Qwiic Button with built-in red LED simplifies all of those nasty worries away into an ea
- BOB-15932
- SparkFun
-
1:
£4.22
-
20In Stock
|
Mouser Part No
474-BOB-15932
|
SparkFun
|
SparkFun Accessories Buttons are an easy and tactile way to interface with your project but why would you want to deal with debouncing polling and wiring up pull-up resistors? The Qwiic Button with built-in red LED simplifies all of those nasty worries away into an ea
|
|
20In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
Optoelectronics
|
Red LED
|
|
|
|
SparkFun Accessories Buttons are an easy and tactile way to interface with your project but why would you want to deal with debouncing polling and wiring up pull-up resistors? The Qwiic Button with built-in green LED simplifies all of those nasty worries away into an
- BOB-16842
- SparkFun
-
1:
£4.17
-
23In Stock
|
Mouser Part No
474-BOB-16842
|
SparkFun
|
SparkFun Accessories Buttons are an easy and tactile way to interface with your project but why would you want to deal with debouncing polling and wiring up pull-up resistors? The Qwiic Button with built-in green LED simplifies all of those nasty worries away into an
|
|
23In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
Qwiic Button with Green LEDs
|
|
|
|
|
SparkFun Accessories SparkFun Qwiic Shield for Arduino
- DEV-14352
- SparkFun
-
1:
£5.81
-
8In Stock
|
Mouser Part No
474-DEV-14352
|
SparkFun
|
SparkFun Accessories SparkFun Qwiic Shield for Arduino
|
|
8In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
Shields
|
Qwiic Connect System
|
|
|
|
SparkFun Accessories The SparkFun Qwiic Adapter provides the perfect means to make any old I2C board into a Qwiic-enabled board. This adapter breaks out the I2C pins from the Qwiic connectors to pins that you can easily solder with your favorite I2C-enabled device.The Qw
- DEV-14495
- SparkFun
-
1:
£1.17
-
|
Mouser Part No
474-DEV-14495
|
SparkFun
|
SparkFun Accessories The SparkFun Qwiic Adapter provides the perfect means to make any old I2C board into a Qwiic-enabled board. This adapter breaks out the I2C pins from the Qwiic connectors to pins that you can easily solder with your favorite I2C-enabled device.The Qw
|
|
|
|
Min.: 1
Mult.: 1
|
|
|
Adapters
|
Qwiic Adapter
|
|
|
|
SparkFun Accessories The SparkFun Qwiic Shield for Arduino Nano provides you with a quick and easy way to enter into SparkFun's Qwiic ecosystem with your Arduino Nano board. The Qwiic shield connects the I2C bus (GND 3.3V SDA and SCL) on your Arduino Nano to four Spark
- DEV-16789
- SparkFun
-
1:
£4.06
-
14In Stock
|
Mouser Part No
474-DEV-16789
|
SparkFun
|
SparkFun Accessories The SparkFun Qwiic Shield for Arduino Nano provides you with a quick and easy way to enter into SparkFun's Qwiic ecosystem with your Arduino Nano board. The Qwiic shield connects the I2C bus (GND 3.3V SDA and SCL) on your Arduino Nano to four Spark
|
|
14In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
Shields
|
Qwiic Shield
|
|
|
|
SparkFun Accessories Have you ever wanted to control something powerful or have you ever needed to turn on/off a high power device from your Arduino or another low powered microcontroller? The SparkFun Qwiic Single Relay provides you with the easiest to use relay yet. Th
- COM-15093
- SparkFun
-
1:
£13.46
-
59In Stock
-
61On Order
|
Mouser Part No
474-COM-15093
|
SparkFun
|
SparkFun Accessories Have you ever wanted to control something powerful or have you ever needed to turn on/off a high power device from your Arduino or another low powered microcontroller? The SparkFun Qwiic Single Relay provides you with the easiest to use relay yet. Th
|
|
59In Stock
61On Order
|
|
Min.: 1
Mult.: 1
|
No
|
|
Accessories
|
Qwiic Single Relay
|
|
|
|
SparkFun Accessories Keypads are very handy input devices but who wants to tie up seven GPIO pins wire up a handful of pull-up resistors and write firmware that wastes valuable processing time scanning the keys for inputs? The SparkFun Qwiic Keypad comes fully assembl
- COM-15290
- SparkFun
-
1:
£9.87
-
12In Stock
|
Mouser Part No
474-COM-15290
|
SparkFun
|
SparkFun Accessories Keypads are very handy input devices but who wants to tie up seven GPIO pins wire up a handful of pull-up resistors and write firmware that wastes valuable processing time scanning the keys for inputs? The SparkFun Qwiic Keypad comes fully assembl
|
|
12In Stock
|
|
Min.: 1
Mult.: 1
|
No
|
|
Accessories
|
|
|
|
|
SparkFun Accessories Buttons are an easy and tactile way to interface with your project but why deal with debouncing polling and wiring up pull-up resistors? The SparkFun Qwiic Button Breakout simplifies all those worries away into an easy-to-use I2C device. Utilizing
- BOB-15931
- SparkFun
-
1:
£3.25
-
17In Stock
|
Mouser Part No
474-BOB-15931
|
SparkFun
|
SparkFun Accessories Buttons are an easy and tactile way to interface with your project but why deal with debouncing polling and wiring up pull-up resistors? The SparkFun Qwiic Button Breakout simplifies all those worries away into an easy-to-use I2C device. Utilizing
|
|
17In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
Breakout Boards
|
|
|
|
|
SparkFun Accessories The SparkFun Qwiic Shield for Thing Plus provides you with a quick and easy way to enter into SparkFun's Qwiic ecosystem with your Thing Plus or Feather boards. Since the Thing Plus and Feather footprints are interchangable you can use this shield w
- DEV-16790
- SparkFun
-
1:
£4.04
-
16In Stock
|
Mouser Part No
474-DEV-16790
|
SparkFun
|
SparkFun Accessories The SparkFun Qwiic Shield for Thing Plus provides you with a quick and easy way to enter into SparkFun's Qwiic ecosystem with your Thing Plus or Feather boards. Since the Thing Plus and Feather footprints are interchangable you can use this shield w
|
|
16In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
Shields
|
Qwiic Shield
|
|
|
|
SparkFun Accessories The SparkFun Qwiic MicroPressure Sensor is a miniature breakout equipped with Honeywell's 25psi piezoresistive silicon pressure sensor. This MicroPressure Sensor offers a calibrated and compensated pressure sensing range of 60mbar to 2.5bar easy to
- SEN-16476
- SparkFun
-
1:
£31.31
-
21In Stock
|
Mouser Part No
474-SEN-16476
|
SparkFun
|
SparkFun Accessories The SparkFun Qwiic MicroPressure Sensor is a miniature breakout equipped with Honeywell's 25psi piezoresistive silicon pressure sensor. This MicroPressure Sensor offers a calibrated and compensated pressure sensing range of 60mbar to 2.5bar easy to
|
|
21In Stock
|
|
Min.: 1
Mult.: 1
|
No
|
|
Sensors
|
|
|
|
|
SparkFun Accessories This SparkFun Qwiic Pro Micro BoogieBoard was a limited edition version of the Qwiic Pro Micro. We are now out of stock and are not reproducing it. The SparkFun Qwiic Pro Micro BoogieBoard is a Special Edition version of the SparkFun Qwiic Pro Micro
- DEV-16442
- SparkFun
-
1:
£18.96
-
Non-Stocked
|
Mouser Part No
474-DEV-16442
|
SparkFun
|
SparkFun Accessories This SparkFun Qwiic Pro Micro BoogieBoard was a limited edition version of the Qwiic Pro Micro. We are now out of stock and are not reproducing it. The SparkFun Qwiic Pro Micro BoogieBoard is a Special Edition version of the SparkFun Qwiic Pro Micro
|
|
Non-Stocked
|
|
Min.: 1
Mult.: 1
|
No
|
|
Qwiic Pro Micro BoogieBoards
|
|
|
|
|
SparkFun Accessories This is not your normal Passive Infrared (PIR) sensor! The SparkFun AK9753 Human Presence Sensor Breakout is a Qwiic-enabled 4-channel Nondispersive Infrared (NDIR) sensor. Each channel has a different field of view so not only can the AK9753 detec
- SEN-14349
- SparkFun
-
1:
£17.08
-
N/A
|
Mouser Part No
474-SEN-14349
|
SparkFun
|
SparkFun Accessories This is not your normal Passive Infrared (PIR) sensor! The SparkFun AK9753 Human Presence Sensor Breakout is a Qwiic-enabled 4-channel Nondispersive Infrared (NDIR) sensor. Each channel has a different field of view so not only can the AK9753 detec
|
|
N/A
|
|
Min.: 1
Mult.: 1
|
|
|
Sensors
|
Presence Sensor
|
|
United Kingdom