|
|
SparkFun Accessories This is your simple three conductor sensor cable with electrode pad leads. These cables are 24" long and feature a 3.5mm audio jack connector on one end with snap style receptacles for biomedical sensor pads. Each cable comes in a red/blue/black set.
- CAB-12970
- SparkFun
-
1:
£7.29
-
205In Stock
|
Mouser Part No
474-CAB-12970
|
SparkFun
|
SparkFun Accessories This is your simple three conductor sensor cable with electrode pad leads. These cables are 24" long and feature a 3.5mm audio jack connector on one end with snap style receptacles for biomedical sensor pads. Each cable comes in a red/blue/black set.
|
|
205In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
Cables
|
Sensor Cable
|
|
|
|
SparkFun Accessories Load Cell - 5kg, Strght Bar(TAL220B)
- SEN-14729
- SparkFun
-
1:
£13.55
-
80In Stock
|
Mouser Part No
474-SEN-14729
|
SparkFun
|
SparkFun Accessories Load Cell - 5kg, Strght Bar(TAL220B)
|
|
80In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
Sensors
|
Load Cell - 5kg, Straight Bar
|
|
|
|
SparkFun Accessories This disc load cell (sometimes called a strain gauge) can translate up to a whopping 200kg of pressure (force) into an electrical signal. Each load cell is able to measure the electrical resistance that changes in response to and proportional of th
- SEN-13332
- SparkFun
-
1:
£83.79
-
14In Stock
|
Mouser Part No
474-SEN-13332
|
SparkFun
|
SparkFun Accessories This disc load cell (sometimes called a strain gauge) can translate up to a whopping 200kg of pressure (force) into an electrical signal. Each load cell is able to measure the electrical resistance that changes in response to and proportional of th
|
|
14In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
|
|
|
SparkFun Accessories Flex Sensor 4.5"
- SEN-08606
- SparkFun
-
1:
£16.46
-
16In Stock
|
Mouser Part No
474-SEN-08606
|
SparkFun
|
SparkFun Accessories Flex Sensor 4.5"
|
|
16In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
Sensors
|
|
|
|
|
SparkFun Accessories The AH1815 is an integrated Hall-Effect non-latched sensor. That s nice but what does it do? Holding a magnet near the sensor will cause the output pin to toggle. This makes for a robust presence sensor. A reed sensor also works nicely but can be
- SEN-14709
- SparkFun
-
1:
£0.768
-
333In Stock
|
Mouser Part No
474-SEN-14709
|
SparkFun
|
SparkFun Accessories The AH1815 is an integrated Hall-Effect non-latched sensor. That s nice but what does it do? Holding a magnet near the sensor will cause the output pin to toggle. This makes for a robust presence sensor. A reed sensor also works nicely but can be
|
|
333In Stock
|
|
Min.: 1
Mult.: 1
|
No
|
|
Sensors
|
Hall Effect Sensor
|
|
|
|
SparkFun Accessories If you need to add user input without using a button then a capacitive touch interface might be the answer. The AT42QT1010 SparkFun Capacitive Touch Breakout offers a single capacitive touch button with easy-to-use digital I/O pins.The AT42QT1010 is
- SEN-14520
- SparkFun
-
1:
£3.83
-
55In Stock
|
Mouser Part No
474-SEN-14520
|
SparkFun
|
SparkFun Accessories If you need to add user input without using a button then a capacitive touch interface might be the answer. The AT42QT1010 SparkFun Capacitive Touch Breakout offers a single capacitive touch button with easy-to-use digital I/O pins.The AT42QT1010 is
|
|
55In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
Breakout Boards
|
Capacitive Touch Sensor
|
|
|
|
SparkFun Accessories The SparkFun H3LIS331DL Triple Axis Accelerometer Breakout is a low-power high-g accelerometer with I2C and SPI interface options. Though not necessarily good at detecting minute changes the H3LIS331DL is great for grueling conditions that normal a
- SEN-14480
- SparkFun
-
1:
£13.57
-
52In Stock
|
Mouser Part No
474-SEN-14480
|
SparkFun
|
SparkFun Accessories The SparkFun H3LIS331DL Triple Axis Accelerometer Breakout is a low-power high-g accelerometer with I2C and SPI interface options. Though not necessarily good at detecting minute changes the H3LIS331DL is great for grueling conditions that normal a
|
|
52In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
Breakout Boards
|
Triple Axis Accelerometer Sensor
|
|
|
|
SparkFun Accessories Mini Photocell
- SEN-09088
- SparkFun
-
1:
£1.28
-
63In Stock
|
Mouser Part No
474-SEN-09088
|
SparkFun
|
SparkFun Accessories Mini Photocell
|
|
63In Stock
|
|
Min.: 1
Mult.: 1
|
No
|
|
Optoelectronics
|
Photoelectric Sensors
|
|
|
|
SparkFun Accessories Amphenol FCI Clinchr Conn. (2 POS, F)
- COM-14194
- SparkFun
-
1:
£2.35
-
47In Stock
|
Mouser Part No
474-COM-14194
|
SparkFun
|
SparkFun Accessories Amphenol FCI Clinchr Conn. (2 POS, F)
|
|
47In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
Connectors
|
Female FCI Clincher Connector with 2 Position
|
|
|
|
SparkFun Accessories This is a 10 pack of the MyoWare Reference 2.0 Cables. The MyoWare 2.0 Reference Cable is meant as an extension for the MyoWare 2.0 Muscle Sensor's reference pin. You will just need to insert the pin into its housing and place a biomedical sensor p
- KIT-19627
- SparkFun
-
1:
£8.85
-
12In Stock
|
Mouser Part No
474-KIT-19627
|
SparkFun
|
SparkFun Accessories This is a 10 pack of the MyoWare Reference 2.0 Cables. The MyoWare 2.0 Reference Cable is meant as an extension for the MyoWare 2.0 Muscle Sensor's reference pin. You will just need to insert the pin into its housing and place a biomedical sensor p
|
|
12In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
|
|
|
SparkFun Accessories The SparkFun Photodetector Breakout is an updated version of the SparkFun Particle Sensor Breakout which includes the MAX30101 a highly sensitive optical sensor that succeeds the MAX30105 and MAX30102. The MAX30101 Breakout utilizes a photodio
- SEN-16474
- SparkFun
-
1:
£27.74
-
25In Stock
|
Mouser Part No
474-SEN-16474
|
SparkFun
|
SparkFun Accessories The SparkFun Photodetector Breakout is an updated version of the SparkFun Particle Sensor Breakout which includes the MAX30101 a highly sensitive optical sensor that succeeds the MAX30105 and MAX30102. The MAX30101 Breakout utilizes a photodio
|
|
25In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
Breakout Boards
|
|
|
|
|
SparkFun Accessories This is a handy cable for connecting a six pin GHR-06V type locking connector to breadboard friendly male pins. The cable features a 1.25mm pitch GHR-06V 'locking' JST connector commonly found on some sensors radios and other small devices.
- CAB-23353
- SparkFun
-
Restricted Availability
|
Mouser Part No
474-CAB-23353
|
SparkFun
|
SparkFun Accessories This is a handy cable for connecting a six pin GHR-06V type locking connector to breadboard friendly male pins. The cable features a 1.25mm pitch GHR-06V 'locking' JST connector commonly found on some sensors radios and other small devices.
|
|
|
|
|
|
|
Wire & Cable
|
JST-GHR-06V Cable
|
|
|
|
SparkFun Accessories The SparkFun OpenLog Artemis (OLA) is an open-source data logger designed for users who need to capture high-quality data without writing any code. Preprogrammed to automatically log serial data GPS coordinates and sensor readings to a CSV file th
- DEV-19426
- SparkFun
-
Restricted Availability
|
Mouser Part No
474-DEV-19426
|
SparkFun
|
SparkFun Accessories The SparkFun OpenLog Artemis (OLA) is an open-source data logger designed for users who need to capture high-quality data without writing any code. Preprogrammed to automatically log serial data GPS coordinates and sensor readings to a CSV file th
|
|
|
|
|
|
|
OpenLog Artemis
|
Data Logger
|
|
|
|
SparkFun Accessories Line Follower Array Follower Array
- SEN-13582
- SparkFun
-
1:
£32.68
-
9In Stock
|
Mouser Part No
474-SEN-13582
|
SparkFun
|
SparkFun Accessories Line Follower Array Follower Array
|
|
9In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
|
|
|
SparkFun Accessories The MyoWare 2.0 Reference Cable is meant as an extension for the MyoWare 2.0 Muscle Sensor's reference pin. You will just need to insert the pin into its housing and place a biomedical sensor pad into the electrode snap. When ready stick the refer
- CAB-19244
- SparkFun
-
Restricted Availability
|
Mouser Part No
474-CAB-19244
|
SparkFun
|
SparkFun Accessories The MyoWare 2.0 Reference Cable is meant as an extension for the MyoWare 2.0 Muscle Sensor's reference pin. You will just need to insert the pin into its housing and place a biomedical sensor pad into the electrode snap. When ready stick the refer
|
|
|
|
|
|
|
|
EcoWire
|
|
|
|
SparkFun Accessories This is a 5-pin JST-ZHR cable that's terminated with breadboard breadboard compatible male pins. It's the same cable that comes with our SPS30 Particulate Matter Sensor and is a great spare if you need one or if you happen to need to connect to a dev
- CAB-15108
- SparkFun
-
1:
£3.11
-
83In Stock
|
Mouser Part No
474-CAB-15108
|
SparkFun
|
SparkFun Accessories This is a 5-pin JST-ZHR cable that's terminated with breadboard breadboard compatible male pins. It's the same cable that comes with our SPS30 Particulate Matter Sensor and is a great spare if you need one or if you happen to need to connect to a dev
|
|
83In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
Cables
|
|
|
|
|
SparkFun Accessories LIDAR-Lite v3
- SEN-14032
- SparkFun
-
1:
£128.25
-
|
Mouser Part No
474-SEN-14032
|
SparkFun
|
SparkFun Accessories LIDAR-Lite v3
|
|
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
|
|
|
SparkFun Accessories This is a piezoresistive force sensor from Tekscan. The harder you press the lower the sensor's resistance. Pressing hard the resistance changes from infinite to 300k. The sensor itself is thin and flexible but the resistance does not change whil
- SEN-08712
- SparkFun
-
1:
£19.92
-
|
Mouser Part No
474-SEN-08712
|
SparkFun
|
SparkFun Accessories This is a piezoresistive force sensor from Tekscan. The harder you press the lower the sensor's resistance. Pressing hard the resistance changes from infinite to 300k. The sensor itself is thin and flexible but the resistance does not change whil
|
|
|
|
Min.: 1
Mult.: 1
|
|
|
Sensors
|
|
|
|
|
SparkFun Accessories Load Sensor Combinator Ver. 1.1
- BOB-13878
- SparkFun
-
1:
£2.01
-
|
Mouser Part No
474-BOB-13878
|
SparkFun
|
SparkFun Accessories Load Sensor Combinator Ver. 1.1
|
|
|
|
Min.: 1
Mult.: 1
|
|
|
Sensors
|
|
|
|
|
SparkFun Accessories This is a piezoresistive force sensor from Tekscan. The harder you press the lower the sensor's resistance. Pressing lightly the resistance changes from infinite to 300k. The sensor itself is thin and flexible but the resistance does not change w
- SEN-08713
- SparkFun
-
1:
£19.40
-
Non-Stocked Lead-Time 2 Weeks
|
Mouser Part No
474-SEN-08713
|
SparkFun
|
SparkFun Accessories This is a piezoresistive force sensor from Tekscan. The harder you press the lower the sensor's resistance. Pressing lightly the resistance changes from infinite to 300k. The sensor itself is thin and flexible but the resistance does not change w
|
|
Non-Stocked Lead-Time 2 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
Sensors
|
|
|
|
|
SparkFun Accessories Infrared proximity sensor made by Sharp. Part # GP2Y0A41SK0F has an analog output that varies from 3.1V at 4cm to 0.3V at 30cm with a supply voltage between 4.5 and 5.5VDC. The sensor has a Japanese Solderless Terminal (JST) Connector. We recommend p
- SEN-12728
- SparkFun
-
1:
£18.82
-
Non-Stocked
|
Mouser Part No
474-SEN-12728
|
SparkFun
|
SparkFun Accessories Infrared proximity sensor made by Sharp. Part # GP2Y0A41SK0F has an analog output that varies from 3.1V at 4cm to 0.3V at 30cm with a supply voltage between 4.5 and 5.5VDC. The sensor has a Japanese Solderless Terminal (JST) Connector. We recommend p
|
|
Non-Stocked
|
|
Min.: 1
Mult.: 1
|
|
|
Sensors
|
|
|
|
|
SparkFun Accessories This is a small ambient light sensor that acts as an NPN transistor. The more the sensor is exposed to light the stronger the base bias. Simple to use! Simple breakout board available below.Documents:Hookup GuideDatasheet
- COM-08348
- SparkFun
-
1:
£1.28
-
Non-Stocked
|
Mouser Part No
474-COM-08348
|
SparkFun
|
SparkFun Accessories This is a small ambient light sensor that acts as an NPN transistor. The more the sensor is exposed to light the stronger the base bias. Simple to use! Simple breakout board available below.Documents:Hookup GuideDatasheet
|
|
Non-Stocked
|
|
Min.: 1
Mult.: 1
|
|
|
Sensors
|
|
|
|
|
SparkFun Accessories RedBot Sensor Mechanical Bumper
- SEN-11999
- SparkFun
-
1:
£4.75
-
Non-Stocked
|
Mouser Part No
474-SEN-11999
|
SparkFun
|
SparkFun Accessories RedBot Sensor Mechanical Bumper
|
|
Non-Stocked
|
|
Min.: 1
Mult.: 1
|
|
|
Sensors
|
|
|
|
|
SparkFun Accessories Temperature Sensor - TMP36
- SEN-10988
- SparkFun
-
1:
£1.28
-
N/A
|
Mouser Part No
474-SEN-10988
|
SparkFun
|
SparkFun Accessories Temperature Sensor - TMP36
|
|
N/A
|
|
Min.: 1
Mult.: 1
|
|
|
Sensors
|
|
|
|
|
SparkFun Accessories The MPL115A1 is a digital barometer that uses MEMs technology to give accurate pressure measurements between 50kPa and 115kPa. We stock the SPI interface version of the sensor. Average current consumption is 10 A at one measurement per second.The se
- SEN-09602
- SparkFun
-
1:
£6.66
-
Non-Stocked
|
Mouser Part No
474-SEN-09602
|
SparkFun
|
SparkFun Accessories The MPL115A1 is a digital barometer that uses MEMs technology to give accurate pressure measurements between 50kPa and 115kPa. We stock the SPI interface version of the sensor. Average current consumption is 10 A at one measurement per second.The se
|
|
Non-Stocked
|
|
Min.: 1
Mult.: 1
|
|
|
Sensors
|
|
|
United Kingdom