SparkFun Electronics Tools & Supplies

Results: 971
Select Image Part #
 Mfr.
Description Datasheet Availability Pricing (GBP) Filter the results in the table by unit price based on your quantity.
Qty. RoHS
SparkFun SparkFun Accessories This 2xAA battery holder puts a nice finishing touch on your battery powered project. This holder features a removable sliding cover which is secured with a small phillips head screw. Another bonus is the ON/OFF switch which can be used to control Non-Stocked
Min.: 1
Mult.: 1

SparkFun SparkFun Accessories This beefy heatsink is designed to dissipate a lot of heat! The 6400BG heatsink fits TO-220 TO-218 TO-247 and Multiwatt packages - which means it's a great fit for the STA540 L298N and all of our T-220 package voltage regulators. Non-Stocked
Min.: 1
Mult.: 1

SparkFun SparkFun Accessories This is a simple six wire cable. Great for jumping from board to board or just about anything else. There is a 6-pin Molex connector with 0.1" spacing on one end bare cable on the opposite end. It also comes with the mating connector for the Molex.D
Datasheet
Non-Stocked
Min.: 1
Mult.: 1

SparkFun SparkFun Accessories This is a simple two wire cable. It has bare wires on both ends with a Molex A and B connector in the middle. With thicker 18 AWG wire it's better for higher current applications.Dimensions: 6" lengthDocuments:Datasheet
Datasheet
Non-Stocked
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories This is a 10-pin header with 2mm pitch that mates with our XBee socket. It can be used for making 'dummy XBees' or anything else you want!Note: This item is sold singly not in pairs.Documents:Datasheet Non-Stocked
Min.: 1
Mult.: 1

SparkFun SparkFun Accessories These nylon standoffs are 3/8" long and tapped for a 4-40 screw. These are great for mounting your board in an enclosure or just getting it up off the table. Sold as individuals. Non-Stocked
Min.: 1
Mult.: 1

SparkFun SparkFun Accessories These nylon standoffs are 3/8" long and tapped for a 4-40 screw. These are great for mounting your board in an enclosure or just getting it up off the table. Each standoff has an outer diameter of 6mm.Sold in packs of 10. Check below for matching sc Non-Stocked
Min.: 1
Mult.: 1

SparkFun SparkFun Accessories This is a 33 meter roll of polyimide tape. This tape is a fantastic insulator like electrical tape but it can withstand temperatures as high as 258 C (496 F). It also provides good resistance to corrosion and the silicone adhesive holds tight thr Non-Stocked
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories This is a wire assembly terminated with a 8-pin JST-SH connector. Great for jumping from board to board or just about anything else. One end is terminated with a JST-SH connector and the other end is tinned bare wire leads.Note: The color of these wi Non-Stocked
Min.: 1
Mult.: 1

SparkFun SparkFun Accessories This 3xAA battery holder puts a nice finishing touch on your battery powered project. This holder features a removable sliding cover which is secured with a small phillips head screw. Another bonus is the ON/OFF switch which can be used to control Non-Stocked
Min.: 1
Mult.: 1

SparkFun SparkFun Accessories Copper tape has countless applications in electronics from creating low-profile traces for electrical components to RF-shielding and antenna-making. Copper tape is even used to join things together using solder like the stained glass on Tiffany lamp Non-Stocked
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories These are standard 0.1" spaced header pins that can be surface mounted for applications where through-hole pins won't work. The surface mount side of the legs are staggered for stress relief.This is a 6-Pin male header.Documents:Datasheet Non-Stocked
Min.: 1
Mult.: 1

SparkFun SparkFun Accessories These are standard 0.1" spaced header pins that can be surface mounted for applications where through-hole pins won't work. The surface mount side of the legs are staggered for stress relief.This is a 10-Pin male header.Documents:Datasheet Non-Stocked
Min.: 1
Mult.: 1

SparkFun SparkFun Accessories These are standard 0.1" spaced header pins that can be surface mounted for applications where through-hole pins won't work. The surface mount side of the legs are staggered for stress relief.This is an 8-Pin female header.Documents:Datasheet Non-Stocked
Min.: 1
Mult.: 1

SparkFun SparkFun Accessories These are standard 0.1" spaced header pins that can be surface mounted for applications where through-hole pins won't work. The surface mount side of the legs are staggered for stress relief.This is a 6-Pin female header.Documents:Datasheet Non-Stocked
Min.: 1
Mult.: 1

SparkFun SparkFun Accessories These nylon standoffs are 3/4" long and tapped for a 4-40 screw. These are great for mounting your board in an enclosure or just getting it up off the table. The black nylon will give your project a very sessy look.Sold in packs of ten. Check below Non-Stocked
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories This 4xAA battery holder puts a nice finishing touch on your battery powered project. This holder features a removable sliding cover which is secured with a small phillips head screw. Another bonus is the ON/OFF switch which can be used to control Non-Stocked
Min.: 1
Mult.: 1

SparkFun SparkFun Accessories PCB mount clip to hold a AAA battery. Sold in single units you'll need two for each battery. These work great for small low power applications that need a battery to run. Low cost and easy to use!Documents:Datasheet Non-Stocked
Min.: 1
Mult.: 1

SparkFun SparkFun Accessories This 6 position screw terminal block provides a simple way to connect wires to a single connection point. These blocks allow wires to be screwed together and self-isolated without needing to twist solder or any other splicing by this method wiring Non-Stocked
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories This is a simple 2x8 male PTH header. This header is that you will find commonly used to interface with a basic 8x2 character LCDs. Each pin has a spacing of 0.1" in between each other.Documents:Datasheet Non-Stocked
Min.: 1
Mult.: 1

SparkFun SparkFun Accessories Screw-Phillip Head M3 x 12mm Non-Stocked
Min.: 1
Mult.: 1

SparkFun SparkFun Accessories Adjustable Parts Box
Datasheet
Non-Stocked Lead-Time 14 Weeks
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories This is a Screw Terminal with 3.5mm pitch pins. Comes in 2 3 or 4 positions and have the really cool feature of slide-locking together to form any size you need (4 5 up to 20 without problems). Rated up to 300V @ 10A. Terminal can accept 26 to 16
Datasheet
Non-Stocked
Min.: 1
Mult.: 1

SparkFun SparkFun Accessories Jumper wires are awesome. Just a little bit of stranded core wire with a nice solid pin connector on either end. They have the flexibility of stranded wire but will fit directly into breadboards and female pin headers. These are 6 inch long 26 AWG j
Datasheet
Non-Stocked
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories This standard 22 AWG hook-up wire is great for general connections between projects (low or high current applications). When you only need two connections to something (like power a button or an indicator LED) this keeps your wiring nice and organi Non-Stocked
Min.: 1
Mult.: 1