|
|
RF Development Tools The EVB-MFLP-00002P is a connectorized evaluation board for the MFLP-00002PSM passive MMIC surface mount 9.40GHz lowpass filter.
- EVB-MFLP-00002P
- Marki Microwave
-
1:
£508.89
-
-
New At Mouser
|
Mouser Part No
10-EVB-MFLP-00002P
New At Mouser
|
Marki Microwave
|
RF Development Tools The EVB-MFLP-00002P is a connectorized evaluation board for the MFLP-00002PSM passive MMIC surface mount 9.40GHz lowpass filter.
|
|
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
RF Development Tools The EVB-MFLP-00011P is a connectorized evaluation board for the MFLP-00011PSM passive MMIC surface mount 7.1GHz lowpass filter.
- EVB-MFLP-00011P
- Marki Microwave
-
1:
£508.89
-
-
New Product
|
Mouser Part No
10-EVB-MFLP-00011P
New Product
|
Marki Microwave
|
RF Development Tools The EVB-MFLP-00011P is a connectorized evaluation board for the MFLP-00011PSM passive MMIC surface mount 7.1GHz lowpass filter.
|
|
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
RF Development Tools The EVB-MFLP-00028 is a connectorized evaluation board for the MFLP-00028CSP1 passive MMIC surface mount 10.7 GHz lowpass filter.
- EVB-MFLP-00028
- Marki Microwave
-
1:
£508.89
-
-
New Product
|
Mouser Part No
10-EVB-MFLP-00028
New Product
|
Marki Microwave
|
RF Development Tools The EVB-MFLP-00028 is a connectorized evaluation board for the MFLP-00028CSP1 passive MMIC surface mount 10.7 GHz lowpass filter.
|
|
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
RF Development Tools This is the evaluation board for the MM1A-0626SPSM integrated drive GaAs MMIC mixer.
- EVB-MM1A-0626S
- Marki Microwave
-
1:
£508.89
-
-
New Product
|
Mouser Part No
10-EVB-MM1A-0626S
New Product
|
Marki Microwave
|
RF Development Tools This is the evaluation board for the MM1A-0626SPSM integrated drive GaAs MMIC mixer.
|
|
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
RF Development Tools The EVB-MMPX-00001P is a connectorized evaluation board for the MMPX-00001PSM is a MMIC surface mount quadplexer capable of multiplexing 2-4 GHz / 6-8 GHz / 10-12 GHz / 14-16 GHz signals.
- EVB-MMPX-00001P
- Marki Microwave
-
1:
£551.65
-
-
New Product
|
Mouser Part No
10-EVB-MMPX-00001P
New Product
|
Marki Microwave
|
RF Development Tools The EVB-MMPX-00001P is a connectorized evaluation board for the MMPX-00001PSM is a MMIC surface mount quadplexer capable of multiplexing 2-4 GHz / 6-8 GHz / 10-12 GHz / 14-16 GHz signals.
|
|
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
RF Development Tools The EVB-MPD-0422F is a connectorized evaluation board for the MPD-0422FCSP2 MMIC 4-22GHz 2-Way power divider/power splitter.
- EVB-MPD-0422F
- Marki Microwave
-
1:
£384.87
-
-
New Product
|
Mouser Part No
10-EVB-MPD-0422F
New Product
|
Marki Microwave
|
RF Development Tools The EVB-MPD-0422F is a connectorized evaluation board for the MPD-0422FCSP2 MMIC 4-22GHz 2-Way power divider/power splitter.
|
|
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
RF Development Tools The EVB-MPD4-0218 is a connectorized evaluation board for the MPD4-0218CSP3 MMIC 2-18 GHz 4-Way power divider/power splitter.
- EVB-MPD4-0218
- Marki Microwave
-
1:
£423.36
-
-
New Product
|
Mouser Part No
10-EVB-MPD4-0218
New Product
|
Marki Microwave
|
RF Development Tools The EVB-MPD4-0218 is a connectorized evaluation board for the MPD4-0218CSP3 MMIC 2-18 GHz 4-Way power divider/power splitter.
|
|
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
RF Development Tools The EVB-MPDW-0670 is a connectorized evaluation board for the MPDW-0670CSP2 MMIC 6-70GHz 2-Way power divider/power splitter.
- EVB-MPDW-0670
- Marki Microwave
-
1:
£508.89
-
-
New At Mouser
|
Mouser Part No
10-EVB-MPDW-0670
New At Mouser
|
Marki Microwave
|
RF Development Tools The EVB-MPDW-0670 is a connectorized evaluation board for the MPDW-0670CSP2 MMIC 6-70GHz 2-Way power divider/power splitter.
|
|
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
RF Amplifier A small, low power, and economical T3 driver or T3A pre-amplifier. It is a GaAs PHEMT distributed amplifier in a 3mm QFN surface mount package.
- ADM-0012-5931SM
- Marki Microwave
-
25:
£51.62
-
Non-Stocked Lead-Time 10 Weeks
|
Mouser Part No
10-ADM-0012-5931SM
|
Marki Microwave
|
RF Amplifier A small, low power, and economical T3 driver or T3A pre-amplifier. It is a GaAs PHEMT distributed amplifier in a 3mm QFN surface mount package.
|
|
Non-Stocked Lead-Time 10 Weeks
|
|
Min.: 25
Mult.: 25
|
|
|
|
|
RF Amplifier A wideband distributed low noise amplifier capable of providing 19 dB gain and +29 dBm OIP3 from DC to 18 GHz and a low 1.7 dB typical noise figure from 4 to 14 GHz.ADM-8344 is available A 4mm QFN and can be supplied from a single positive bias.
- ADM-8344PSM
- Marki Microwave
-
25:
£95.91
-
Non-Stocked Lead-Time 10 Weeks
-
New Product
|
Mouser Part No
10-ADM-8344PSM
New Product
|
Marki Microwave
|
RF Amplifier A wideband distributed low noise amplifier capable of providing 19 dB gain and +29 dBm OIP3 from DC to 18 GHz and a low 1.7 dB typical noise figure from 4 to 14 GHz.ADM-8344 is available A 4mm QFN and can be supplied from a single positive bias.
|
|
Non-Stocked Lead-Time 10 Weeks
|
|
Min.: 25
Mult.: 25
|
|
|
|
|
RF Amplifier The ADM-8475PSM is a high-linearity, low noise amplifier capable of providing 13 dB gain, +26 dBm OIP3 and 2 dB noise figure across a broad 0.5-18 GHz bandwidth.
- ADM-8475PSM
- Marki Microwave
-
25:
£55.56
-
Non-Stocked Lead-Time 10 Weeks
|
Mouser Part No
10-ADM-8475PSM
|
Marki Microwave
|
RF Amplifier The ADM-8475PSM is a high-linearity, low noise amplifier capable of providing 13 dB gain, +26 dBm OIP3 and 2 dB noise figure across a broad 0.5-18 GHz bandwidth.
|
|
Non-Stocked Lead-Time 10 Weeks
|
|
Min.: 25
Mult.: 25
|
|
|
|
|
RF Amplifier The ADM-8536PSM is one of the world's smallest 2-20 GHz high linearity, low noise amplifier solution, featuring 10.5 dB gain, +25 dBm OIP3 and 2.5 dB noise figure, making it suitable for use in RF front-ends.
- ADM-8536PSM
- Marki Microwave
-
25:
£55.56
-
Non-Stocked Lead-Time 10 Weeks
|
Mouser Part No
10-ADM-8536PSM
|
Marki Microwave
|
RF Amplifier The ADM-8536PSM is one of the world's smallest 2-20 GHz high linearity, low noise amplifier solution, featuring 10.5 dB gain, +25 dBm OIP3 and 2.5 dB noise figure, making it suitable for use in RF front-ends.
|
|
Non-Stocked Lead-Time 10 Weeks
|
|
Min.: 25
Mult.: 25
|
|
|
|
|
RF Amplifier A high-linearity low noise amplifier capable of providing 15.5 dB gain, 2 dB noise figure and +26 dBm OIP3 up to 10 GHz. The amplifier is suitable for use in RF front-ends requiring low noise, high gain and excellent signal fidelity.
- ADM-8622PSM
- Marki Microwave
-
1:
£22.02
-
Non-Stocked Lead-Time 10 Weeks
-
New At Mouser
|
Mouser Part No
10-ADM-8622PSM
New At Mouser
|
Marki Microwave
|
RF Amplifier A high-linearity low noise amplifier capable of providing 15.5 dB gain, 2 dB noise figure and +26 dBm OIP3 up to 10 GHz. The amplifier is suitable for use in RF front-ends requiring low noise, high gain and excellent signal fidelity.
|
|
Non-Stocked Lead-Time 10 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
RF Amplifier A high-linearity, low noise amplifier capable of providing 11.5 dB gain and +25 dBm OIP3 across a broad 0.2-20 GHz bandwidth. It's low power consumption, high dynamic range and size make it an ideal choice for RF front end, low SWaP applications.
- ADM-8624PSM
- Marki Microwave
-
25:
£55.56
-
Non-Stocked Lead-Time 10 Weeks
|
Mouser Part No
10-ADM-8624PSM
|
Marki Microwave
|
RF Amplifier A high-linearity, low noise amplifier capable of providing 11.5 dB gain and +25 dBm OIP3 across a broad 0.2-20 GHz bandwidth. It's low power consumption, high dynamic range and size make it an ideal choice for RF front end, low SWaP applications.
|
|
Non-Stocked Lead-Time 10 Weeks
|
|
Min.: 25
Mult.: 25
|
|
|
|
|
RF Amplifier A high-linearity low noise amplifier capable of providing 18 dB gain, 1.5 dB noise figure and +27 dBm OIP3 from 750 MHz to 8 GHz. It can serve either as a linear signal amplifier, or as a saturated driver amplifier for H- or S-diode mixers.
- ADM-8625PSM
- Marki Microwave
-
1:
£22.02
-
Non-Stocked Lead-Time 10 Weeks
-
New At Mouser
|
Mouser Part No
10-ADM-8625PSM
New At Mouser
|
Marki Microwave
|
RF Amplifier A high-linearity low noise amplifier capable of providing 18 dB gain, 1.5 dB noise figure and +27 dBm OIP3 from 750 MHz to 8 GHz. It can serve either as a linear signal amplifier, or as a saturated driver amplifier for H- or S-diode mixers.
|
|
Non-Stocked Lead-Time 10 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
RF Amplifier A wideband distributed low noise amplifier capable of providing 16 dB gain and +25 dBm OIP3 from 2 to 20 GHz and a low 1.8 dB typical noise figure from 8 to 16 GHz.
- ADM-9027PSM
- Marki Microwave
-
25:
£66.18
-
Non-Stocked Lead-Time 10 Weeks
-
New Product
|
Mouser Part No
10-ADM-9027PSM
New Product
|
Marki Microwave
|
RF Amplifier A wideband distributed low noise amplifier capable of providing 16 dB gain and +25 dBm OIP3 from 2 to 20 GHz and a low 1.8 dB typical noise figure from 8 to 16 GHz.
|
|
Non-Stocked Lead-Time 10 Weeks
|
|
Min.: 25
Mult.: 25
|
|
|
|
|
RF Amplifier A wideband distributed low noise amplifier capable of providing 16 dB gain and +24 dBm OIP3 from 10MHz to 26 GHz and a low 2.5 dB typical noise figure from 6 to 20 GHz.
- ADM-9028PSM
- Marki Microwave
-
25:
£67.84
-
Non-Stocked Lead-Time 10 Weeks
-
New Product
|
Mouser Part No
10-ADM-9028PSM
New Product
|
Marki Microwave
|
RF Amplifier A wideband distributed low noise amplifier capable of providing 16 dB gain and +24 dBm OIP3 from 10MHz to 26 GHz and a low 2.5 dB typical noise figure from 6 to 20 GHz.
|
|
Non-Stocked Lead-Time 10 Weeks
|
|
Min.: 25
Mult.: 25
|
|
|
|
|
RF Amplifier A wideband distributed amplifier capable of providing 14.5 dB gain and +31 dBm OIP3 from 100MHz to 22 GHz. The ADM-9181PSM is an ideal linear signal amplifier for applications requiring low power consumption and small form-factors.
- ADM-9181PSM
- Marki Microwave
-
1:
£108.09
-
Non-Stocked Lead-Time 10 Weeks
-
New Product
|
Mouser Part No
10-ADM-9181PSM
New Product
|
Marki Microwave
|
RF Amplifier A wideband distributed amplifier capable of providing 14.5 dB gain and +31 dBm OIP3 from 100MHz to 22 GHz. The ADM-9181PSM is an ideal linear signal amplifier for applications requiring low power consumption and small form-factors.
|
|
Non-Stocked Lead-Time 10 Weeks
|
|
|
£108.09
|
|
|
£90.07
|
|
|
£77.20
|
|
|
£70.18
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
RF Adapters - In Series The ADPFKFK is a 2.92mm Female to 2.92mm Female straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-40 GHz bandwidth. 3/8" torque wrench and 6 mm fixed wrench recommended.
- ADPFKFK
- Marki Microwave
-
1:
£59.33
-
Non-Stocked Lead-Time 12 Weeks
-
New Product
|
Mouser Part No
10-ADPFKFK
New Product
|
Marki Microwave
|
RF Adapters - In Series The ADPFKFK is a 2.92mm Female to 2.92mm Female straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-40 GHz bandwidth. 3/8" torque wrench and 6 mm fixed wrench recommended.
|
|
Non-Stocked Lead-Time 12 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
RF Adapters - Between Series The ADPFVFK is a 2.4mm Female to 2.92mm Female straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-40 GHz bandwidth. 3/8" torque wrench and 5.5 or 6 mm fixed wrench recommended.
- ADPFVFK
- Marki Microwave
-
1:
£87.81
-
Non-Stocked Lead-Time 12 Weeks
-
New Product
|
Mouser Part No
10-ADPFVFK
New Product
|
Marki Microwave
|
RF Adapters - Between Series The ADPFVFK is a 2.4mm Female to 2.92mm Female straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-40 GHz bandwidth. 3/8" torque wrench and 5.5 or 6 mm fixed wrench recommended.
|
|
Non-Stocked Lead-Time 12 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
RF Adapters - In Series The ADPFVFV is a 2.4mm Female to 2.4mm Female straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-50 GHz bandwidth. 3/8" torque wrench and 6 mm fixed wrench recommended.
- ADPFVFV
- Marki Microwave
-
1:
£83.06
-
Non-Stocked Lead-Time 12 Weeks
-
New Product
|
Mouser Part No
10-ADPFVFV
New Product
|
Marki Microwave
|
RF Adapters - In Series The ADPFVFV is a 2.4mm Female to 2.4mm Female straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-50 GHz bandwidth. 3/8" torque wrench and 6 mm fixed wrench recommended.
|
|
Non-Stocked Lead-Time 12 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
RF Adapters - Between Series The ADPFVMK is a 2.4mm Female to 2.92mm Male straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-40 GHz bandwidth. 3/8" torque wrench and 5.5 mm fixed wrench recommended.
- ADPFVMK
- Marki Microwave
-
1:
£87.81
-
Non-Stocked Lead-Time 12 Weeks
-
New Product
|
Mouser Part No
10-ADPFVMK
New Product
|
Marki Microwave
|
RF Adapters - Between Series The ADPFVMK is a 2.4mm Female to 2.92mm Male straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-40 GHz bandwidth. 3/8" torque wrench and 5.5 mm fixed wrench recommended.
|
|
Non-Stocked Lead-Time 12 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
RF Adapters - In Series The ADPMKFK is a 2.92mm Male to 2.92mm Female straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-40 GHz bandwidth. 3/8" torque wrench and 5.5 mm fixed wrench recommended.
- ADPMKFK
- Marki Microwave
-
1:
£62.82
-
Non-Stocked Lead-Time 12 Weeks
-
New Product
|
Mouser Part No
10-ADPMKFK
New Product
|
Marki Microwave
|
RF Adapters - In Series The ADPMKFK is a 2.92mm Male to 2.92mm Female straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-40 GHz bandwidth. 3/8" torque wrench and 5.5 mm fixed wrench recommended.
|
|
Non-Stocked Lead-Time 12 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
RF Adapters - In Series The ADPMKMK is a 2.92mm Male to 2.92mm Male straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-40 GHz bandwidth. 3/8" torque wrench and 5.5 mm fixed wrench recommended.
- ADPMKMK
- Marki Microwave
-
1:
£62.82
-
Non-Stocked Lead-Time 12 Weeks
-
New Product
|
Mouser Part No
10-ADPMKMK
New Product
|
Marki Microwave
|
RF Adapters - In Series The ADPMKMK is a 2.92mm Male to 2.92mm Male straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-40 GHz bandwidth. 3/8" torque wrench and 5.5 mm fixed wrench recommended.
|
|
Non-Stocked Lead-Time 12 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
RF Adapters - Between Series The ADPMVFK is a 2.4mm Male to 2.92mm Female straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-40 GHz bandwidth. 3/8" torque wrench and 6 mm fixed wrench recommended.
- ADPMVFK
- Marki Microwave
-
1:
£92.98
-
Non-Stocked Lead-Time 12 Weeks
-
New Product
|
Mouser Part No
10-ADPMVFK
New Product
|
Marki Microwave
|
RF Adapters - Between Series The ADPMVFK is a 2.4mm Male to 2.92mm Female straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-40 GHz bandwidth. 3/8" torque wrench and 6 mm fixed wrench recommended.
|
|
Non-Stocked Lead-Time 12 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
United Kingdom
